一、为什么要使用负载均衡技术？
1、系统高可用性
2、 系统可扩展性
3、 负载均衡能力
LVS+keepalived能很好的实现以上的要求，LVS提供负载均衡，keepalived提供健康检查，故障转移，提高系统的可用性！采用这样的架构以后很容易对现有系统进行扩展，只要在后端添加或者减少realserver，只要更改lvs的配置文件，并能实现无缝配置变更！
二、LVS+Keepalived介绍
1、 LVS
LVS是一个开源的软件，可以实现LINUX平台下的简单负载均衡。LVS是Linux Virtual Server的缩写，意思是Linux虚拟服务器。目前有三种IP负载均衡技术（VS/NAT、VS/TUN和VS/DR）；八种调度算法（rr,wrr,lc,wlc,lblc,lblcr,dh,sh）。
2、 keepalived
Keepalived 是运行在lvs 之上，它的主要功能是实现真实机的故障隔离及负载均衡器间的失败切换，提高系统的可用性
三、环境：
四台服务器，系统全为CentOS6.8：
192.168.2.203 master lvs+keepalived
192.168.2.202 backup lvs+keepalived
192.168.2.204 web1（nginx）
192.168.2.205 web2 （nginx）
vip：192.168.2.13
其中nginx已预装好，这里不再写搭建过程
四、搭建并配置
1、分别在backup lvs和master lvs上安装lvs
1 root@bogon src]# yum -y install ipvsadm
2 已加载插件：fastestmirror
3 设置安装进程
4 Determining fastest mirrors
5 epel/metalink | 5.4 kB 00:00
6 * base: mirror.lzu.edu.cn
7 … …
8 已安装:
9 ipvsadm.x86_64 0:1.26-4.el6
10
11 作为依赖被安装:
12 libnl.x86_64 0:1.1.4-2.el6
13
14 完毕！
2、把ipvsadm模块加载进系统
1 [root@bogon src]# ipvsadm
2 IP Virtual Server version 1.2.1 (size=4096)
3 Prot LocalAddress:Port Scheduler Flags
4 -> RemoteAddress:Port Forward Weight ActiveConn InActConn
5 [root@bogon src]# lsmod | grep ip_vs
6 ip_vs 126897 0
7 libcrc32c 1246 1 ip_vs
8 ipv6 336282 270 ip_vs,ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6
3、分别在backup lvs和master lvs上安装keepalived（keepalived官网：http://www.keepalived.org/）
[root@bogon src]# tar zxf keepalived-1.2.24.tar.gz
[root@bogon src]# cd keepalived-1.2.24
[root@bogon keepalived-1.2.24]# ./configure –sysconf=/etc –with-kernel-dir=/lib/modules/2.6.32-642.3.1.el6.x86_64/
报错：
configure: error:
!!! OpenSSL is not properly installed on your system. !!!
!!! Can not include OpenSSL headers files. !!!
系统缺少openssl-devel包所致
安装openssl-devel
root@bogon keepalived-1.2.24]# yum -y install openssl-devel
再次编辑安装
[root@bogon keepalived-1.2.24]# ./configure –sysconf=/etc –with-kernel-dir=/lib/modules/2.6.32-642.3.1.el6.x86_64/
Keepalived configuration
————————
Keepalived version : 1.2.24
Compiler : gcc
Preprocessor flags : -I/lib/modules/2.6.32-642.3.1.el6.x86_64//include
Compiler flags : -Wall -Wunused -Wstrict-prototypes
Linker flags :
Extra Lib : -ldl -lssl -lcrypto
Use IPVS Framework : Yes
IPVS use libnl : No
IPVS syncd attributes : No
IPVS 64 bit stats : No
fwmark socket support : Yes
Use VRRP Framework : Yes
Use VRRP VMAC : Yes
Use VRRP authentication : Yes
With ip rules/routes : Yes
SNMP keepalived support : No
SNMP checker support : No
SNMP RFCv2 support : No
SNMP RFCv3 support : No
SHA1 support : No
Use Debug flags : No
Stacktrace support : No
Memory alloc check : No
libnl version : None
Use IPv4 devconf : No
Use libiptc : No
Use libipset : No
Build genhash : Yes
Build documentation : No
[root@bogon keepalived-1.2.24]# make && make install
[root@bogon keepalived-1.2.24]# ln -s /usr/local/sbin/keepalived /sbin/
[root@bogon keepalived-1.2.24]# chkconfig –add keepalived
[root@bogon keepalived-1.2.24]# chkconfig –level 35 keepalived on
4、配置keepalived
lvs-master的配置文件如下
[root@bogon keepalived-1.2.24]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs { #全局配置部分
# notification_email { #email 通知，基本不用此处所以注释掉
# acassen@firewall.loc
# failover@firewall.loc
# sysadmin@firewall.loc
# }
# notification_email_from Alexandre.Cassen@firewall.loc
# smtp_server 192.168.200.1
# smtp_connect_timeout 30
router_id LVS_DEVEL # 设置lvs的id，在一个网络内应该是唯一的
vrrp_skip_check_adv_addr
vrrp_strict
vrrp_garp_interval 0
vrrp_gna_interval 0
}
vrrp_instance VI_1 { #vrrp实例定义部分
state MASTER #设置lvs的状态，报错MASTER和BACKUP两种，必须大写
interface eth1 #设置对外服务的接口
virtual_router_id 60 #设置虚拟路由标示，这个标示是一个数字，同一个vrrp实例使用唯一标示
priority 100 #定义优先级，数字越大优先级越高，在一个vrrp——instance下，master的优先级必须大于backup
advert_int 1 #设定master与backup负载均衡器之间同步检查的时间间隔，单位是秒
authentication { #设置验证类型和密码
auth_type PASS #主要有PASS和AH两种
auth_pass 1111 #验证密码，同一个vrrp_instance下MASTER和BACKUP密码必须相同
}
virtual_ipaddress { #设置虚拟ip地址，可以设置多个，每行一个
192.168.2.13
}
}
virtual_server 192.168.2.13 80 { #设置虚拟服务器，需要指定虚拟ip和服务端口
delay_loop 3 #健康检查时间间隔
lb_algo rr #负载均衡调度算法
lb_kind DR #负载均衡转发规则
persistence_timeout 50 #设置会话保持时间，对动态网页非常有用
protocol TCP #指定转发协议类型，有TCP和UDP两种
real_server 192.168.2.204 80 { #配置服务器节点1，需要指定real server的真实IP地址和端口
weight 1 #设置权重，数字越大权重越高
TCP_CHECK { #realserver的状态监测设置部分单位秒
connect_timeout 3 #超时时间
nb_get_retry 3 #重试次数
delay_before_retry 3 #重试间隔
connect_port 80 #监测端口
}
}
real_server 192.168.2.205 80 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
LVS-backup的配置文件如下
[root@bogon keepalived-1.2.24]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
# notification_email {
# acassen@firewall.loc
# failover@firewall.loc
# sysadmin@firewall.loc
# }
# notification_email_from Alexandre.Cassen@firewall.loc
# smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
vrrp_skip_check_adv_addr
vrrp_strict
vrrp_garp_interval 0
vrrp_gna_interval 0
}
vrrp_instance VI_1 {
state BACKUP
interface eth1
virtual_router_id 60
priority 80
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.2.13
}
}
virtual_server 192.168.2.13 80 {
delay_loop 3
lb_algo rr
lb_kind DR
persistence_timeout 3
protocol TCP
real_server 192.168.2.204 80 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 192.168.2.205 80 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
5、realserver的配置
两台web服务器都要执行下面脚本
[root@bogon www]# cat /etc/rc.d/init.d/realserver.sh
#!/bin/bash
# description: Config realserver lo and apply noarp
SNS_VIP=192.168.2.13
/etc/rc.d/init.d/functions
case “$1” in
start)
ifconfig lo:0 $SNS_VIP netmask 255.255.255.255 broadcast $SNS_VIP
/sbin/route add -host $SNS_VIP dev lo:0
echo “1” >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo “2” >/proc/sys/net/ipv4/conf/lo/arp_announce
echo “1” >/proc/sys/net/ipv4/conf/all/arp_ignore
echo “2” >/proc/sys/net/ipv4/conf/all/arp_announce
sysctl -p >/dev/null 2>&1
echo “RealServer Start OK”
;;
stop)
ifconfig lo:0 down
route del $SNS_VIP >/dev/null 2>&1
echo “0” >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo “0” >/proc/sys/net/ipv4/conf/lo/arp_announce
echo “0” >/proc/sys/net/ipv4/conf/all/arp_ignore
echo “0” >/proc/sys/net/ipv4/conf/all/arp_announce
echo “RealServer Stoped”
;;
*)
echo “Usage: $0 {start|stop}”
exit 1
esac
exit 0
[root@bogon www]# /etc/rc.d/init.d/realserver.sh start
/etc/rc.d/init.d/realserver.sh: line 6: /etc/rc.d/init.d/functions: 权限不够
RealServer Start OK
[root@bogon www]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:41:71:DF
inet addr:192.168.12.129 Bcast:192.168.12.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe41:71df/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:728 errors:0 dropped:0 overruns:0 frame:0
TX packets:98 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:137311 (134.0 KiB) TX bytes:7369 (7.1 KiB)
eth1 Link encap:Ethernet HWaddr 00:0C:29:41:71:E9
inet addr:192.168.2.204 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe41:71e9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:119838 errors:0 dropped:0 overruns:0 frame:0
TX packets:31612 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:23411786 (22.3 MiB) TX bytes:2119106 (2.0 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:182 (182.0 b) TX bytes:182 (182.0 b)
lo:0 Link encap:Local Loopback
inet addr:192.168.2.13 Mask:255.255.255.255
UP LOOPBACK RUNNING MTU:65536 Metric:1
6、启动keepalived并进行测试
[root@bogon keepalived-1.2.24]# service keepalived start
正在启动 keepalived： [确定]
lvs-master
[root@bogon keepalived-1.2.24]# tail -f /var/log/messages
Oct 21 01:19:46 bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 21 01:19:46 bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 21 01:19:46 bogon Keepalived_healthcheckers[6596]: Netlink reflector reports IP 192.168.2.13 added
Oct 21 01:19:46 bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 21 01:19:51 bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 21 01:19:51 bogon Keepalived_vrrp[6597]: VRRP_Instance(VI_1) Sending/queueing gratuitous ARPs on eth1 for 192.168.2.13
Oct 21 01:19:51 bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 21 01:19:51 bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 21 01:19:51 bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 21 01:19:51 bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1 for 192.168.2.13
[root@bogon keepalived-1.2.24]# ipvsadm -L -n
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.2.13:80 rr persistent 3
-> 192.168.2.204:80 Route 1 0 0
-> 192.168.2.205:80 Route 1 0 0
访问curl http://192.168.2.13/test.txt
[root@www etc]# curl http://192.168.2.13/test.txt
it is web2
[root@www etc]# curl http://192.168.2.13/test.txt
it is web2
关掉web2再次测试
[root@www etc]# curl http://192.168.2.13/test.txt
it is web1
[root@www etc]# curl http://192.168.2.13/test.txt
it is web1
查看lvs-master
[root@bogon keepalived-1.2.24]# ipvsadm -L -n
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.2.13:80 rr persistent 3
-> 192.168.2.204:80 Route 1 0 2
[root@bogon keepalived-1.2.24]# tail -f /var/log/messages
Oct 21 01:19:51 bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 21 01:19:51 bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 21 01:19:51 bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 21 01:19:51 bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 21 01:28:58 bogon Keepalived_healthcheckers[6596]: TCP connection to [192.168.2.205]:80 failed.
Oct 21 01:29:01 bogon Keepalived_healthcheckers[6596]: TCP connection to [192.168.2.205]:80 failed.
Oct 21 01:29:01 bogon Keepalived_healthcheckers[6596]: Check on service [192.168.2.205]:80 failed after 1 retry.
Oct 21 01:29:01 bogon Keepalived_healthcheckers[6596]: Removing service [192.168.2.205]:80 from VS [192.168.2.13]:80
Oct 21 01:29:01 bogon Keepalived_healthcheckers[6596]: Remote SMTP server [192.168.200.1]:25 connected.
Oct 21 01:29:31 bogon Keepalived_healthcheckers[6596]: Timeout reading data to remote SMTP server [192.168.200.1]:25.
已经自动把web2剔除
打开web2再次查看
[root@bogon keepalived-1.2.24]# ipvsadm -L -n
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.2.13:80 rr persistent 3
-> 192.168.2.204:80 Route 1 0 0
-> 192.168.2.205:80 Route 1 0 0
[root@bogon keepalived-1.2.24]# tail -f /var/log/messages
Oct 21 01:19:51 bogon Keepalived_vrrp[6597]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 21 01:28:58 bogon Keepalived_healthcheckers[6596]: TCP connection to [192.168.2.205]:80 failed.
Oct 21 01:29:01 bogon Keepalived_healthcheckers[6596]: TCP connection to [192.168.2.205]:80 failed.
Oct 21 01:29:01 bogon Keepalived_healthcheckers[6596]: Check on service [192.168.2.205]:80 failed after 1 retry.
Oct 21 01:29:01 bogon Keepalived_healthcheckers[6596]: Removing service [192.168.2.205]:80 from VS [192.168.2.13]:80
Oct 21 01:29:01 bogon Keepalived_healthcheckers[6596]: Remote SMTP server [192.168.200.1]:25 connected.
Oct 21 01:29:31 bogon Keepalived_healthcheckers[6596]: Timeout reading data to remote SMTP server [192.168.200.1]:25.
Oct 21 01:31:01 bogon Keepalived_healthcheckers[6596]: TCP connection to [192.168.2.205]:80 success.
Oct 21 01:31:01 bogon Keepalived_healthcheckers[6596]: Adding service [192.168.2.205]:80 to VS [192.168.2.13]:80
Oct 21 01:31:01 bogon Keepalived_healthcheckers[6596]: Remote SMTP server [192.168.200.1]:25 connected.
恢复后已自动添加进来
关掉lvs master的keepalived
[root@bogon keepalived-1.2.24]# service keepalived stop
停止 keepalived： [确定]
访问web并查看lvs backup
[root@www etc]# curl http://192.168.2.13/test.txt
it is web2
[root@www etc]# curl http://192.168.2.13/test.txt
it is web2
[root@lys2 src]# tail -f /var/log/messages
Oct 23 19:03:26 lys2 Keepalived_vrrp[13124]: VRRP_Instance(VI_1) Transition to MASTER STATE
Oct 23 19:03:27 lys2 Keepalived_vrrp[13124]: VRRP_Instance(VI_1) Entering MASTER STATE
Oct 23 19:03:27 lys2 Keepalived_vrrp[13124]: VRRP_Instance(VI_1) setting protocol VIPs.
Oct 23 19:03:27 lys2 Keepalived_healthcheckers[13123]: Netlink reflector reports IP 192.168.2.13 added
Oct 23 19:03:27 lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 23 19:03:27 lys2 Keepalived_vrrp[13124]: VRRP_Instance(VI_1) Sending/queueing gratuitous ARPs on eth1 for 192.168.2.13
Oct 23 19:03:27 lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 23 19:03:27 lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 23 19:03:27 lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 23 19:03:27 lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 23 19:03:32 lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 23 19:03:32 lys2 Keepalived_vrrp[13124]: VRRP_Instance(VI_1) Sending/queueing gratuitous ARPs on eth1 for 192.168.2.13
Oct 23 19:03:32 lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 23 19:03:32 lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 23 19:03:32 lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1 for 192.168.2.13
Oct 23 19:03:32 lys2 Keepalived_vrrp[13124]: Sending gratuitous ARP on eth1 for 192.168.2.13
[root@lys2 src]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:89:0f:e3 brd ff:ff:ff:ff:ff:ff
inet 192.168.144.101/24 brd 192.168.144.255 scope global eth0
inet6 fe80::20c:29ff:fe89:fe3/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:89:0f:ed brd ff:ff:ff:ff:ff:ff
inet 192.168.2.202/24 brd 192.168.2.255 scope global eth1
inet 192.168.2.13/32 scope global eth1
inet6 fe80::20c:29ff:fe89:fed/64 scope link
valid_lft forever preferred_lft forever
可以看到lvs backup已自动切换成master状态并自动绑定了vip
查看lvs master vip
[root@bogon keepalived-1.2.24]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:55:4d:7a brd ff:ff:ff:ff:ff:ff
inet 192.168.12.128/24 brd 192.168.12.255 scope global eth0
inet6 fe80::20c:29ff:fe55:4d7a/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:55:4d:84 brd ff:ff:ff:ff:ff:ff
inet 192.168.2.203/24 brd 192.168.2.255 scope global eth1
inet6 fe80::20c:29ff:fe55:4d84/64 scope link
valid_lft forever preferred_lft forever
已自动解除vip
到处全部结束
以下文章点击率最高
Loading…