===============================安装ihs ,plugin,wct ===================
[root@ibmtest ihs]# cd /opt/IBM/InstallationManager/eclipse/tools/
[root@ibmtest tools]# ./imcl listAvailablePackages -repositories /home/cnzymh/ihs/was-v85-suppl
com.ibm.websphere.APPCLIENT.v85_8.5.0.20120501_1108
com.ibm.websphere.IHS.v85_8.5.0.20120501_1108
com.ibm.websphere.PLG.v85_8.5.0.20120501_1108
com.ibm.websphere.PLUGCLIENT.v85_8.5.0.20120501_1108
com.ibm.websphere.WCT.v85_8.5.0.20120501_1108
[root@ibmtest tools]# ./imcl install com.ibm.websphere.IHS.v85_8.5.0.20120501_1108 -repositories /home/cnzymh/ihs/was-v85-suppl/ -properties user.ihs.httpPort=80 -acceptLicense
已将 com.ibm.websphere.IHS.v85_8.5.0.20120501_1108 安装到 /opt/IBM/HTTPServer 目录。
[root@ibmtest tools]# ./imcl install com.ibm.websphere.PLG.v85_8.5.0.20120501_1108 -repositories /home/cnzymh/ihs/was-v85-suppl/ -acceptLicense
已将 com.ibm.websphere.PLG.v85_8.5.0.20120501_1108 安装到 /opt/IBM/WebSphere/Plugins 目录。
[root@ibmtest tools]# ./imcl install com.ibm.websphere.WCT.v85_8.5.0.20120501_1108 -repositories /home/cnzymh/ihs/was-v85-suppl/ -acceptLicense
已将 com.ibm.websphere.WCT.v85_8.5.0.20120501_1108 安装到 /opt/IBM/WebSphere/Toolbox 目录。
=================================启动ihs ==================
[root@ibmtest bin]# ./apachectl start
[root@ibmtest bin]# netstat -na | grep 80
tcp6 0 0 :::80 :::* LISTEN
tcp6 0 0 :::9809 :::* LISTEN
tcp6 0 0 :::2809 :::* LISTEN
unix 2 [ ] STREAM CONNECTED 38092
unix 3 [ ] STREAM CONNECTED 20080
===================================修改IHS Admin配置======================
[root@ibmtest bin]# cd /opt/IBM/HTTPServer/conf/
[root@ibmtest conf]# ls
admin.conf admin.conf.default httpd.conf ldap.prop.sample magic.default mime.types.default
admin.conf.bak20171130 admin.passwd httpd.conf.default magic mime.types postinst.properties
[root@ibmtest conf]# vi admin.conf
###############################################################################
# #
# IBM Administration Server Unix Configuration File #
# #
###############################################################################
# Port used to access the Administration Server
Listen 8080
# Directory where the Administration Server binaries are installed
ServerRoot “/opt/IBM/HTTPServer”
# Name and location of the sockets file.
# This file is used for communication between IHS Admin Child process
# and parent process required for handling Start and Stop requests.
AdminSocketFile logs/adminSocket
# Name and location of the process ID file
PidFile logs/admin.pid
# Basic settings used by the Administration Server
HostnameLookups off
#UseCanonicalName on
Timeout 300
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 5
# Worker MPM
ThreadLimit 5
ServerLimit 4
StartServers 1
MaxClients 20
MinSpareThreads 5
MaxSpareThreads 10
ThreadsPerChild 5
MaxRequestsPerChild 0
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule’ lines at this location so the
# directives contained in it are actually available _before_ they are used.
###############################################################################
# #
# IBM Administration Server Unix Configuration File #
# #
###############################################################################
# Port used to access the Administration Server
Listen 8080
# Directory where the Administration Server binaries are installed
ServerRoot “/opt/IBM/HTTPServer”
# Name and location of the sockets file.
# This file is used for communication between IHS Admin Child process
# and parent process required for handling Start and Stop requests.
AdminSocketFile logs/adminSocket
# Name and location of the process ID file
PidFile logs/admin.pid
# Basic settings used by the Administration Server
HostnameLookups off
#UseCanonicalName on
Timeout 300
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 5
# Worker MPM
ThreadLimit 5
ServerLimit 4
StartServers 1
MaxClients 20
MinSpareThreads 5
MaxSpareThreads 10
ThreadsPerChild 5
MaxRequestsPerChild 0
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule’ lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l’) do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
# Load only modules needed by the Administration Server
LoadModule alias_module modules/mod_alias.so
LoadModule mime_module modules/mod_mime.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule dir_module modules/mod_dir.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule log_config_module modules/mod_log_config.so
# Load Administration Server module
LoadModule ibm_admin_module modules/mod_ibm_admin.so
# Uncomment the following line to load the IBM SSL module.
#LoadModule ibm_ssl_module modules/mod_ibm_ssl.so
#
# First, configure the “default” to be completely restricted.
#
<Directory />
AllowOverride None
Order deny,allow
Deny from all
</Directory>
#
# Next, configure the admin server to handle /wasadmin.
#
<Location /wasadmin>
SetHandler admin-sail
AuthName “IBM Administration Server”
AuthType Basic
AuthBasicProvider file
AuthUserFile “/opt/IBM/HTTPServer/conf/admin.passwd”
require valid-user
Allow from all
</Location>
# Directory and name of log files
#
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, warn
#
LogLevel warn
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host’s errors will be logged there and not here.
#
ErrorLog logs/admin_error.log
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat “%h %l %u %t \”%r\” %>s %b \”%{Referer}i\” \”%{User-Agent}i\”” combined
LogFormat “%h %l %u %t \”%r\” %>s %b” common
LogFormat “%{Referer}i -> %U” referer
LogFormat “%{User-agent}i” agent
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog logs/admin_access_log common
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, “text/plain” is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use “application/octet-stream” instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# Uncomment the following 2 lines to enable SSL and define a keyfile
# to use. The Keyfile directive must match the name and location of
# a valid key file which is installed on your system.
# Note: You must have installed the IBM SSL support for this to work
#SSLEnable
#Keyfile “/opt/IBM/HTTPServer/keys/keyfile.kdb”
# Default user and group settings for the server
User @@SetupadmUser@@
Group @@SetupadmGroup@@
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
#
# If your host doesn’t have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#
Group nobody
# it explicitly to prevent problems during startup.
# redirections will not work. See also the UseCanonicalName directive.
# redirections work in a sensible way.
ServerName ibmtest:
ServerName ibmtest:8080
“admin.conf” 153L, 5462C written
============================启动 ihs admin 服务====================
[root@ibmtest bin]# ./adminctl start
./adminctl start: admin http started
[root@ibmtest bin]# netstat -na | grep 8080
tcp6 0 0 :::8080 :::* LISTEN
以下文章点击率最高
Loading…